Automatic Sleeve Labeling Self Adhesive Labeling Machine

SSW-306B Rotary Hot-melt Glue Labeling Machine

Composition

- Main rotary wheel
- Touch-screen
- Electronic-controlled cabinet
- Label station support regulation device
- Rack- Infeed screw
- Infeed starwheel
- Label reels
- Label station
- Discharge starwheel
- Comfort label institution
- Glue supply system

1. Equipment constitutes
A: Mainframe
- SANYO servo system
- SANYO servo drive system
- SANYO motion controller
- Siemens PLC
- Siemens Color Touch-screen HMI
- Japan SUNX Digital Color Mark Sensor
- Japan SUNX Detection Sensor for coating adhesive
- Japan SUNX Photoelectric Sensor
- Japan SUNX Pressure Sensor

B: Mechanical parks
- Transportation institution: TRANSTECNO AC motor 750W (with deceleration by TRANSTECNO), inverter speed control
- Conveyor: Industrial nylon chain plate conveyor
- Mainframe transportation institution: TRANSTECNO AC motor 1.5Kw (with deceleration by TRANSTECNO)
- Sub bottle institution: Industrial worm sub bottle institution
- Into bottle institution: With worm sub bottle institution and starwheel position feeding institution to ensure the accuracy and stability of loading
- Position institution: Mechanical pre-location, using the camwheel institution to planish the bottle for label positioning
- Labeling institution: Containers are picked up by rotary wheel, labeling during the rotation.
- Supply label institution: SUNSWELL high speed servo OPP label supply system (drive by servo-motor)
- Pressing label institution: Arc brush unit
- Guided bottle institution: Adjust by double coordinate section guide rail
- Glue supply system: SUNSWELL hotmelt glue supply system (German Siemens control system) ensures the accuracy and uniformity of gluing

2. Safety part of the machine
- Safety protection: In order to keep the operator safety, when the machine is running please close the protective doors
- Lack of label alarm: Set an alarm to remind the operator to change the label when the label will be use out
- Lack of bottle alarm: When lack of the bottle the machine will stop and make an alarm. The machine will restart automatically as soon as the bottles have been put that will facilitate on-line production
- Leak of labeling alarm: To control the quality of labeling
- Pressure testing: When the pressure cannot meet the equipment requirement, the machine will stop to against bad products produce
- Vacuum testing: When the vacuum cannot meet the equipment requirement, the machine will stop to against bad products produce
- Temperature testing: When the temperature cannot meet the equipment requirement, the machine will stop to against bad products produce

3. Technical parameters:
- Power supply: Three-phase 380V 50 Hz 8000W
The total length of equipment: 3000mm (conveyor length 3000mm or can be regulate base on your product lines)
Equipment width: 2000mm
- Conveyor speed: 35m/min (the speed of the transmission lines can be adjusted according to actual production)
- The method of speed adjustment: Uninterrupted - adjust rate
- The largest Speed of labels feed: Maximum speed of 100 meters labels / min
- The largest speed of labeling: 3000 PCS/H
- Labeling accuracy: ± 1mm
- Integrated Labeling accuracy: ± 1mm
- Product Size: Base on client supply container ( 5LΦ 173mm or 6L Φ 182mm )
- Maximum label width: 160mm
- The maximum length of label: 500mm
- The maximum diameter of label: 500mm
- Paper core diameter: 152 mm
- Labeling glue: Leading and trailing edge gluing with hot melt
- Gluing temperature: 120~160C
- Type of label: OPP label, paper-plastic composite film label, paper label
- Labeling workstation: 6 per cycle
- The quantity of labeling mold: One suit (to be satisfied with one product, each mold contains infeed worm, infeed starwheel, discharge starwheel, position bottle and so on )
- Machine Dimension: 1200*2000*1900mm (L*W*H)
- Machine weight: About 2000kg