| Customization: | Available |
|---|---|
| Condition: | New |
| Customized: | Customized |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. General description
The whole system is mainly composed of bottle conveyor, rack stacker and rack conveyor. Rack stacker is mainly composed of barrel recline frame, rack stacker frame, barrel recline assembly, barrel rolling assembly, barrel pushing assembly, elevation assembly, non-motorized roller conveyor, motorized roller conveyor and electrical control cabinet.
2. Technical parameter
1) Model: RS-450
2) Dimension:
Barrel recline frame: 1900mm*1100mm*1690mm
Rack stacker frame: 3080mm*1400mm*2290mm
Non-motorized conveyor: 3000mm*1500mm*230mm
Motorized conveyor: 3000mm*1500mm*430mm
3) Capacity: up to 900BPH
4) Power: 4.5KW
5) Air consume: 0.3m3/min 0.8-1.0Mpa
3. Working principle
User put empty rack on infeed non-motorized roller conveyor and push the rack onto motorized roller conveyor. The motorized roller conveyor's Motor 3 starts to work and convey the rack to limiting position. The barrel conveyor starts to infeed barrels. After four barrels enter barrel recline device, the cylinder pushes recline table to recline barrels. And barrel rolling Motor 1 follows to drive the pushing device to push barrels onto barrel holder of rack stacker. And then the elevator Motor 2 starts to work and drives execution mechanism to make barrel holder aim at the first layer's holes of the rack. Barrel pushing Motor 4 follows to drive pushing mechanism to push barrels into holes of the rack. The above mentioned actions will be repeated till the whole rack stacking is completed. After the rack stacking is finished, the rack limiting cylinder acts or release the full rack and motorized roller conveyor runs to convey the rack to non-motorized roller conveyor. Finally, the full rack is moved out by forklift.
){kind=link}