High Quality Laban Milk Rinsing Filling Sealing Machine Flavored Water Aseptic Milk Processing Equipment Line

Product Description

Product Description

 

Aseptic Cold Filling Machine:

Our Aseptic cold filling line on basis of the advantages of the similiar foreign products. Our Aseptic cold filling line adopts aseptic isolation technology to ensure the aseptic of filling material,packing environment and packaging containers.Reliable sterilizing method is used to sterilize empty bottles and caps.
 

In addition,the utilization of COP and SOP ensures the asepsis of the equipment inside and outside surface and adoption of aseptic compressed air ensures the positive pressure of filling environment for clean room environment.

Whats's more,CIP cleaning and SIP sterilizing are used to clean and sterilize the material pipeline,which prevents the material sterilized by UHT from being polluted, thus ensuring the asepsis of final products.

Main Features

1.Our Aseptic cold filling line is modularly constructed for great flexibility.It combines the dumping machine,rinser,filler and capper into one unit,and the part above the table-board is full closed by shielding can.
2.The rinsing machine can wash the inside and outside of the empty bottle by aseptic water.Dripping is also available.
3.The use of non-contact filling valve effectively prevents second pollution.
4.The imported electronic weighing sensor of filling valve ensures high measuring precision and makes it convenient to adjust product variety.
5.Transmisson part of capping plunger chip uses heat shield device to effectively seperate the pollution zone and clean zone.
6.The adoption of magnetic constant torque capping head helps ensure capping quality.
7.Our Aseptic cold filling line is equipped with centralized lubrication system.
8.Automatic control of CIP and SIP operations is realized.

Rinser
*Bottle clamps are installed on the rotary table of the bottle machine, and the bottle clamps clamp the bottle mouth and turn it over 180° along a guide rail to make the bottle mouth face down.

*In the specific area of the bottle rinser, the nozzle on the bottle clamp sprays out the rinse water to rinse the inner wall of the bottle.

*After the bottle is rinsed and drained, it is held by the bottle holder and turned over 180° along the guide rail to make the bottle mouth upward.

*The washed bottles are exported from the bottle rinser through the dial assembly and sent to the filling machine.

 

Filler

*Customized valve, non-backflow for filling, design with cleaning circuit .

 

*When a bottle is detected, the filling valve is turned on, and the material is put into the bottle.

 

*After the filling is completed, the filling valve is turned off; the filled bottle passes through the transition wheel in the wheel assembly, and is sent to the capping machine of the three-in-one machine , the anti-rotation knife on the capping machine clamps the bottle neck, keeps the bottle upright and prevents rotation.

 

Capper

*The capping head keeps revolving and rotating on the capping machine, and under the action of the cam, it realizes the actions of cap grasping, capping, capping, and capping, and completes the entire capping process.

 

*The finished bottle is conveyed from the capping machine to the bottle conveying chain through the bottle conveying wheel, and then conveyed out of the three-in-one filling machine by the conveying chain.

Main configuration
Touch screen: Mitsubishi
Inverter: Mitsubishi
PLC program controller: Mitsubishi
Pneumatic component: Airtac
Main motor: Siemens or equivalent

Product List

Model	Output
CGF14-12-5	5000BPH (500ml)
CGF16-16-5	7000BPH (500ml)
CGF24-24-6	10000BPH (500ml)
CGF32-32-8	15000BPH (500ml)
CGF40-40-10	18000BPH (500ml)
CGF50-50-12	22000BPH (500ml)
CGF72-72-18	30000BPH (500ml)
CGF84-84-20	36000BPH (500ml)

 

About Sunswell