Sunswell Full-Automatic Combiblock: Big Plastic Bottle Blowing, Filling & Capping

Product Description

High Speed PET Bottle Blow Molding Machine

This SSW-R series model of fully automatic rotary heating stretch blow molding machinery is specially designed for high speed based on absorbing all international latest technology, it is an economic two stage automatic stretch blow molding machine, mainly used for PET stretch blow bottles. The machine consumes less power due to optimized machine layouts and patented preform heating system, so the end of user can achieve maximun profit in today's competitive bottle molding market.

Main Features

1. Preform feeding system: Single channel preform feeding and starwheel preform feeding are adopted, which effectively solves the problem of preform blocking and wearing.2. Revolution system: It adopts special chain and is driven by servo motor, so that the heating unit can move smoothly, with fast positioning and low noise.
3. Heating system: Heating and conveying in the mode of rotary blow molding machine can reduce energy consumption and greatly improve the speed and quality of heating.
4. Mold system: high pressure mold clamping technology is adopted, there is no mold expansion phenomenon, and the mold clamping line is thin. The mold adopts drawer structure, and is positioned with four fixed tie rods on the mold back panel, which can be easily replaced within half an hour.
5. Stretch blow system: the cycle time of the first blow and the second blow can be adjusted. According to the customer's different preforms and different bottle types, each rod can be adjusted individually, with high flexibility.
6. Electric control system: Pneumatic and electrical components are from internationally renowned brands. The touch screen control system is easy to operate, has perfect monitoring and induction settings, has fault diagnosis functions, and automatically calculates reports to master the production efficiency of each shift.
7. Cooling/chilled water circulation system: There is a cooling water channel under the heating box. When the preform is heated, the cooling water channel is used to block the heat of the lamp tube and protect the teeth from deformation. Chilled water leads to the mold, which cools the mold quickly and improves the production efficiency of the whole machine.

Main Configuration:

Component name	Origin	Brand	EX400
Electrical/Control Components			45,000
Air switch	France	Schneider (TE)	220
Intermediate relay	Japan	Omron ( OMRON )	1.8–2.5
Contactor	France	Schneider (TE)	8.8
Button	France	Schneider (TE)	13.6
Control switch	France	Schneider (TE)	600
Magnetic switch	Taiwan	AIRTAC
Touch screen	Taiwan	Delta (DELTA)
Motion Controller	Taiwan	Delta (DELTA)
Servo	Taiwan	Delta (DELTA)
Cylinder	Taiwan	AIRTAC
Valves/Fittings
First blow valve	U.K.	Norgren
Second blow valve		Norgren
Vent		Norgren
Cylinder control valve	Taiwan	AIRTAC
Clamping rail	South Korea	WON
Technical Parameters:
Composition	Project	Technical Parameters
Product conditions	The largest diameter of the product (mm)	Φ103
	Product bottle size (mm)	Φ18 ~ Φ38
	The maximum height of the product (mm)	<340
	Suitable for rpeform maximum height (mm)	<165
	Clamping stroke (mm)	125
	Bottom mold stroke (mm)	50
	Bottle spacing mmM)	110
	Production capacity (bottle/hour)	8000-90000BPH(1.5L)
	Production capacity (bottle/hour)	15000-16000BPH(550ML)
	Number of mold cavities
Heating part	Heating unit	6
	Layers of heating lamp	8
	Number of germ tube seats (pieces)	156
Electrical parameters	Voltage	380V
	Frequency	50/60Hz
	Use power	30-40kw/h
	Installed power	100kw
Gas source (The high-pressure air consumption depends on the volume of the PET bottle)	Low pressure compressed air	1Mpa
	Low pressure compressed air consumption	1.0m³/min
	High pressure compressed air	3.0Mpa
	High pressure compressed air consumption	10 m³/min
Cooling water	Pressure	2-4bar
Cooling water (water temperature ≤18°C)	Flow	6m 3 /h
Weight	Host \ heating machine \ electric control box, etc.	about 7.5 t
Equipment Dimensions	Host (L × W × H)	5000mm×2300mm×2900mm
	Preform unscrambling machine (L×W×H)	2950mm×2120mm×3200mm

Company Profile

FAQ

Q1: which city are you in? how can I get to your factory? Are you a trading company or factory?
A1: We are in Zhangjiagang city, two hours driving from Shanghai. We are factory. Manufacturing mainly beverage filling and packagingmachines. We offer turnkey solutions with more than 10 years experience.

Q2: Why is your prices higher than others?
A2: We offer high-end machines in our business. Welcome to our factory to have a visit. And you will see the difference.

Q3: What is your delivery time?
A3: Normally 30-60 working days depends one machines, water machines are faster, carbonated drink machines are slower.

Q4: How to install my machines when it arrives? How much the cost?
A4: We will send our engineers to your factory to install the machines and train your staff how to operate the machines If needed. Or you can arrange engineers to study in our factory. You are responsible for air tickets, accommodation and our engineer wage USD100/day/person.

Q5: How long time for installation?
A5: Subject to machines and the situation in your factory. If everything is ready, it will take about 10 days to 25 days.

Q6: How about the spare parts?
A6: We will send one year enough easy broken spare parts together with the machines for free, we suggest you buy more units to save international courier such as DHL, it is really costly.

Q7: What is your guarantee?
A7: We have one year guarantee and life-long technical support. Our service also including machine maintence.

Q8: What is your payment term?
A8: 30%T/T in advance as down payment, rest should be paid before shipping. L/C is supported also.

Any more questions, pls feel free to contact me !