Application :
Pure water ,mineral water, drinking water,still water, soda water, flavered water , natural water ,spring water ,potable water
Bottle volume :
0.2L-2L
(Big than 2L bottle volume,we have other machinery can meet your 2L -20L bottle volume requirement) .
The Water machinery combiblock is composed by :
Rotary blower - filler - capper combi / combiblock
Automatic high speed high technology bottled water- blowing -filling-capping combiblock working process:
PET preform -- Automatic preform loader -- Ion air to -- blow the perform dust -- Oven heating preform -- Preform transfer arm -- Blower molds -- sealing, stretching and blowing -- Bottle transfer arm -- Filler -- Downstream line
Blowing Configuration:
1. The machine is made of aluminium alloy, mild steel, stainless steel, alloy steel.
2. Bearing is equipped with superior brands, imported bearing (Japan and Germany); Self lubrication bearing IGUS is used.
3. High pressure valve is procured from NORGREN, EUGEN SEITZ (Swiss), FESTO(Germany) etc.
4. High presser muffler is procured from the USA and NORGREN (Germany).
5. The pneumatic system is procured from FESTO (Germany), SMC (Japan), NORGREN etc.
6. Touch screen and the operation system is from Schneider and SIEMENS (Germany).
7. Electric control system (PLC) is procured fromSIEMENS (Germany, Schneider etc.
8. Photoelectric sensor is procured from TURCK (Germany), B & R (Austria), and BANNER (USA) etc.
9. Transducer is procured from TURCK (Germany), SICK, B&R (Austria), OMRON (Japan) and BANNER (USA) etc.
10. Contactor is procured from SIEMENS (Germany), Schneider etc.
11. Amphenol connector is procured from PHOENIX (USA) and ABB etc.
12. Stainless steel wire trunking (open installation) is adopted, which is convenient for wire arrangement, cleaning and inspecting.
Filling Configuration:
1. The frame of the machine is made of superior mild steel, with rustproof coating treatment on the surface of the machine. Stainless steel (ANSI304) is covered on the frame.
2. Stainless steel table with anti - pull technology is exclusively used, together with "O" type sealing ring. Leaking of bearing pedestal and supporting shaft can be minimized with this construction.
3. The transmission system is right under the machine frame, drove by a main motor and transmitted by gear.
4. Transmission gear arrangement is crossed with steel gear and nylon gear.
5. Overloading protection device is equipped on the output shaft of the main motor.
6. Control System
7. The whole process from bottle - in to bottle - out of the 2 in 1 filling machine is controlled by PLC system.
8. The operation can be done on the touch screen, capacity, count, incident type and spot can all be displayed on the screen. Incidence time and type etc. can be recorded automatically.
9. All parts of pneumatic system are procured from FESTO (Germany).
Technical Model :
| Model |
Stable Capacity@500ml
(bottle/hour) |
Remarks |
| CGX8-24-8 |
12000BPH |
|
| CGX8-32-8 |
15000BPH |
|
| CGX14-40-15 |
24000BPH |
|
| CGX16-50-18 |
30000BPH |
|
| CGX24-60-20 |
36000BPH |
|
| Above models are for reference only, actual model need to be confirmed after communicate with us based on your different bottle volume and capacity requirement. |
(Big than 2L bottle volume,we have other machinery can meet your 2L -20L bottle volume requirement) .
We can also provide turnkey/complete bottling water production line :
1.Water treatment system purify water (Sand filter,carbon filter,RO/UF ,Ozone sterilizer,UV sterilizer and etc.)
2. Rotary Blowing-filling-capping combiblock
5. Cap loader load caps
6. Code printer (Ink-jet printer/ laser-jet printer)
7. Labeling machine ( PVC sleelve labeling machine /OPP hot melt glue labeling machine/Self-adheisive labeling machine )
8. End packaging ( PE shrink wrapping machine / Carton packing machine )
6. Palletizer
Project pictures:
Presales Consultation :
(Bottel Design ) (Factory Production Line Layout Design
Machinery container Loading :
After service :
(Installation) (Spare Parts)
(Sales on-site assistance) (Training)
Any more questions, Contact :
| Contact Person |
Linda Liu |
| Mobile / |
0086 139 622 96902 |
| |
lindahysd5 at gmail.com |
){kind=link}