Product Description
Filling machine for glass bottled water integrates the function of rinsing, filling and capping together. Based on advanced technology overseas, and designed according to room filling processing demands of non-carbonated water and alcoholic drinks to be one of the advanced room filling production line.
|
NO.
|
Model
|
Capacity
|
|
1
|
8-24-8
|
12000bph
|
|
2
|
12-32-10
|
18000bph
|
|
3
|
16-40-15
|
24000bph
|
|
4
|
20-60-18
|
36000bph
|
The bottle enters into the filling part of three-in-one machine through screw rod by convey chain. The filling valve acted by the cam can realize up and down. The filling valve opens and begins filling when it moves down and touches the bottleneck, the filling valve move up and leave the bottleneck when it finishes filling, the full bottle is transferred to the capping part through hold neck transition poking wheel. The guard plate holds bottle upright not rotating. The screw capping head keeps in revolution and autorotation. It can finish a whole capping course including catching, pressing, screwing, discharging through the action of the cam. The full bottle is transferred to bottle outlet conveyor to the next process through poking wheel.
Filling machine for glass bottled water-Input bottle part
Screw bottle feeding, the suitable bottle is 250ml-2000ml.
Filling machie for glass bottled water --Rinsing part
Rotary rinser: applicable for wine, beverage and water cleaning.
The new bottle is transported through the separation screw and starwheel by the clamp and turn over device; bottle neck is held up words, after aseptic water rinsing, the bottle neck goes up and transported to another process.
The rinsing contact part and out cover adopts the stainless steel material
Open design gear driving
The bottle in place is equipped with pneumatic part, controlling the bottle, avoiding the falling down bottle come to the main machine
Water pipe of rinser is equipped with pressure gauge and pressure maintaining valve
Manually adjust the elevation for different height bottle
Water collecting tray: recycle the rinsing water
Rising volume for each bottle: 105ml/s (0.25MPa)
If no bottle or stop, rinsing stops; while it comes to bottle, it runs again.
Filling machine for glass bottled water -Conveyor wheel part
The material is super-corrosion stainless steel ,the wheel has block bottle protect device.
Filling machine part
The design of filling structure is reasonable and hygiene dead angle, the run of equipment is stable, it can control the material from the bottleneck, the control accuracy is within ±2mm.
The filling valve material is SUS304
The filling system has liquid level automatic control.
Filling valve lift is controlled by the valve elevator, after filling valve contact the bottleneck ,it start to fill.
Bottle is conveying by the wheel in the filling part.
ROPP aluminum cap capping machine part
Screw capper is our company introduction of French technology, self-designed and manufactured, with peer leadership, stable performance equipment.
Screw cap heads have novel structure, beautiful shape, easy to clean, easy to adjust. Screw cap pressure is adjustable, so that after sealing cap thread clear, full, the appropriate pressure on the top of the bottle to ensure reliable sealing.
304 stainless steel cap machine, reducing the secondary pollution of bottle cap, 304 stainless steel under cap tank, cap storehouse and under cap tank with electric no cap check system, Automatic control conveyor cap machine and whole machine speed, can be realized without bottle don't conveyor cap, off cap and without cap can auto-shut-down.
Rotary cap unscrambler adopts air blow cap unscrambler, without damaging the surface of cap, avoiding the cap extrusion deformation, hopper have check cap switch, control.
Output bottle star wheel part
Nylon wheel and conveyor belt cooperate output the bottle.
Output bottle conveyor belt part
Conveyor motor use frequency control of motor speed, which keep pace with the 3-in-1 machine. Prevent overturned bottle
Rack part
Rack is welded by high quality carbon steel, Antirust processing and spray surface. The surface is covered by the SUS 304.
Electronic control system part
The electronic components like PLC and transducer are from Mitsubishi, Omron, etc., the pneumatic devices are also from international famous brand.
About Sunswell
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}