OPP Hot Melt Glue Labeling Machine
Composition
- Main rotary wheel
- Touch-screen
- Electronic-controlled cabinet
- Label station support regulation device
- Rack- Infeed screw
- Infeed starwheel
- Label reels
- Label station
- Discharge starwheel
- Comfort label institution
- Glue supply system
1. Equipment constitutes
A: Mainframe
- SANYO servo system
- SANYO servo drive system
- SANYO motion controller
- Siemens PLC
- Siemens Color Touch-screen HMI
- Japan SUNX Digital Color Mark Sensor
- Japan SUNX Detection Sensor for coating adhesive
- Japan SUNX Photoelectric Sensor
- Japan SUNX Pressure Sensor
B: Mechanical parks
- Transportation institution: TRANSTECNO AC motor 750W (with deceleration by TRANSTECNO), inverter speed control
- Conveyor: Industrial nylon chain plate conveyor
- Mainframe transportation institution: TRANSTECNO AC motor 1.5Kw (with deceleration by TRANSTECNO)
- Sub bottle institution: Industrial worm sub bottle institution
- Into bottle institution: With worm sub bottle institution and starwheel position feeding institution to ensure the accuracy and stability of loading
- Position institution: Mechanical pre-location, using the camwheel institution to planish the bottle for label positioning
- Labeling institution: Containers are picked up by rotary wheel, labeling during the rotation.
- Supply label institution: SUNSWELL high speed servo OPP label supply system (drive by servo-motor)
- Pressing label institution: Arc brush unit
- Guided bottle institution: Adjust by double coordinate section guide rail
- Glue supply system: SUNSWELL hotmelt glue supply system (German Siemens control system) ensures the accuracy and uniformity of gluing
2. Safety part of the machine
- Safety protection: In order to keep the operator safety, when the machine is running please close the protective doors
- Lack of label alarm: Set an alarm to remind the operator to change the label when the label will be use out
- Lack of bottle alarm: When lack of the bottle the machine will stop and make an alarm. The machine will restart automatically as soon as the bottles have been put that will facilitate on-line production
- Leak of labeling alarm: To control the quality of labeling
- Pressure testing: When the pressure cannot meet the equipment requirement, the machine will stop to against bad products produce
- Vacuum testing: When the vacuum cannot meet the equipment requirement, the machine will stop to against bad products produce
- Temperature testing: When the temperature cannot meet the equipment requirement, the machine will stop to against bad products produce
Power supply |
Three-phase 380V 50 Hz 8000W |
The total length of equipment |
3000mm(conveyor length 3000mm or can be regulate base on your product lines) |
Equipment width |
2000mm |
Conveyor speed |
35m/min (the speed of the transmission lines can be adjusted according to actual production) |
The method of speed adjustment |
uninterrupted - adjust rate |
The largest Speed of labels feed |
maximum speed of 100 meters labels / min |
The largest speed of labeling |
12000 pcs/H |
Labeling accuracy |
± 1mm |
Integrated Labeling accuracy |
± 1mm |
Product Size: base on client supply container |
2L Φ 100mm |
Maximum label width |
160mm |
The maximum length of label |
500mm |
The maximum diameter of label |
500mm |
Paper core diameter |
152 mm |
Labeling glue |
leading and trailing edge gluing with hot melt |
Gluing temperature |
120~160C |
Type of label |
opp label, paper-plastic composite film label, paper label |
Labeling workstation |
12 per cycle |
The quantity of labeling mold |
1 set |
Machine weight |
2000 Kg |