| Customization: | Available |
|---|---|
| Warranty: | 1 Year |
| Type: | Extrusion Blow Molding Machine |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
4000 Bottles Per Hour Automatic PET bottle blower/blow moulding machine(CE certificated)
Full Automatic Blowing Machine:
1.Fast Injection & Short Cycle Time
2.Installation and Training Provided
3.Low Energy
| Model | Automatic PET bottle blowing machine | |
| Productivity | Depend on bottle design | 9600PCS/H |
| Product type | Body diameter | 20mm-100mm |
| Height | 50mm-350mm | |
| Neck diameter | 15mm-38mm | |
| Mold | Cavity | 6cavities |
| Mold thick | 240mm | |
| Mold | 500*500mm | |
| Main machine power | Electrical source power | 380v 3Phase /220v 3Phase 50/60HZ |
| Rated Power | 49kw | |
| Really use power | 14kw | |
| Air source | LP air compressor | 1.6m3/min 1.0MPa 1set (15KW) |
| HP air compressor | 1.0m3/min 3.0MPa 2sets (each set 11KW) | |
| Air dryer | 2.0m3/min 3.0MPa 1set | |
| Cooling water | Cooling water | 15L/min |
| Size | L*W*H | 1908*1858*1920mm |
| Weight | 3600kg | |
| preform unscrambler | L*W*H | 2000*950*2480mm |
| Weight | 250kg | |
| Resin available | PET | |
Machine Features--- Full automatic blowing machine
1. Stable performance with advanced PLC.
2. Conveying preforms automatically with conveyor.
3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared pre heater.
4. High adjustability to enable the pre heater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the pre heater with an automatic thermostatic apparatus.
5. High safeties with security automatic-locking apparatus in each mechanical action , which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
6. No contamination and low noise with the air cylinder to drive the action in stead of the oil pump.
7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the full automatic blowing machine.
8. Strong clamping force with high pressure and double crank links to lock the mold.
9. Two ways of operating: automatic and manual.
10.Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
12. Contamination is avoided for the bottle body.
13. Ideal effect of the chilling with the chilling system.
14. Easy installation and starting full automatic blowing machine
15. Low rejection rate: less than 0.2 percent.
){kind=link}